Support / Documentation / 8-Bit / ST7

iC1000 & PowerPOD: ST7 (ST Micro)

Item No.	POD Name	POD target layout	Supported CPUs	Required winIDEA version	Documentation
IC81700	ST72F254	DIP28 SDIP32	ST72104G1 ST72104G2 ST72215G2 ST72216G1 ST72254G1 ST72254G2	2008 Build 9.7.155	Hardware Reference ST72F254 POD V1.0 POD supports DIP28 and SDIP32 by default. Socket converter SOC075 (28DIP->28SOIC)
IC81701	ST72F511	T_QFP64	ST72532R4 ST72512R4 ST72511R9 ST72511R7 ST72511R6 ST72334N4 ST72334N2 ST72334J4 ST72334J2 ST72314N4 ST72314N2 ST72314J4 ST72314J2 ST72311R9 ST72311R7 ST72311R6 ST72311N6 ST72311N4 ST72311J2 ST72311J1 ST72124J4 ST72124J2 ST72331J2 * ST72331J4 * ST72331N2 * ST72331N4 *	2008 Build 9.7.155	Hardware Reference ST72F511 POD V1.1 Adapters: QFP64 Yamaichi Adapters: QFP64 TET Adapters: QFP44 Yamaichi (IA64POD44ST7-YA) Adapters: QFP44 TET (IA64POD44ST7) Adapters: SDIP56 (IA64POD56SDIP)
IC81702	ST72141K	DIP34 SDIP32	ST72141K2	2008 Build 9.7.155	Hardware Reference ST72141K POD V1.0 POD supports DIP34 and SDIP32 by default.
IC81703	ST72F521	T_QFP80	ST72(F)521Mx ST72(F)521Rx ST72(F)521ARx ST72(F)321Mx ST72(F)321Rx ST72(F)321ARx ST72(F)321Jx ST72(F)324Jx ST72(F)324Kx ST72325 ST72(F)344Jx ST72(F)344Kx ST72(F)346Jx ST72(F)346Kx	2008 Build 9.7.155	Hardware Reference ST72F521 POD V1.2 Adapters: QFP32 Adapters: QFP44 TET (IA80POD44ST7-TQ) Adapters: QFP44 Yamaichi (IA80POD44ST7-YA) Adapters: QFP64 (14 x 14) (IA80P64ST7-TQ) Adapters: QFP64 (10 x 10) (IA80P64AST7-TQ) Adapters: QFP80 Yamaichi Adapters: QFP80 TET
IC81704	ST72F561	T_QFP64	ST72361K4 ST72361J9 ST72561R9 ST72561R6 ST72561J4 ST72561J6 ST72561J9 ST72561K4	2008 Build 9.7.155	Hardware Reference ST72F561 POD V1.0 Adapters: QFP32 (IA64P32ST7-TQ) Adapters: QFP44 Adapters: QFP64 Yamaichi Adapters: QFP64 TET
IC81705	ST7MC1/MC2	T_QFP80	ST7FMC1K2 ST7MC1K2 ST7PMC1K2 ST7FMC2S4 ST7MC2S4 ST7PMC2S4 ST7FMC2S5 ST7MC2S5 ST7PMC2S5 ST7FMC2N6 ST7MC2N6 ST7PMC2N6 ST7FMC2R6 ST7MC2R6 ST7PMC2R6 ST7FMC2R7 ST7MC2R7 ST7PMC2R7 ST7FMC2M9 ST7MC2M9 ST7PMC2M9	2008 Build 9.7.155	Hardware Reference ST7MC1/MC2 POD V1.1 The adaptation boards (T_QFP converters), delivered beside the POD, must be used when adapting the POD to the target packages other than QFP80. Adapters: QFP32 TET Adapters: QFP44 Yamaichi Adapters: QFP44 TET Adapters: QFP64 Yamaichi Adapters: QFP64 TET Adapters: QFP80 Yamaichi Adapters: QFP80 TET

* I1 in the CCR register must be set to 1 since I1 is actually not present on 331.