Solutions for 8051
Products for 8051
|
Product codes: IC100007 + IC81020-16
Product names: IC1000 PowerEmulator + PowerPod 8031
|
 |
Supported CPUs:
- 8031
- 80C31
- 8032
- 80C32
- 8344
- 80C51FA
- 8xC52/54/58
- 80C154
- 80C321
- 80CL410
- 80C652
- 80C654
- 80C851
- SAB-C501
- SAB-C502
|
|
Documentation:
8051 Technical Notes V9.10.162
Hardware Reference 8031 POD V1.0
Adapters: PLCC44 (IA40D44P8031)
Socket converter SOC049 (40DIP->44QFP)
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
DIP40
|
|
Product codes: IC100007 + IC81022-16
Product names: IC1000 PowerEmulator + PowerPod 80517
|
 |
Supported CPUs:
- 80C515
- 80C535
- 80C517
- 83C537
|
|
Documentation:
8051 Technical Notes V9.10.162
An adaptation board, delivered beside the POD, must be used when adapting the POD to the PLCC68 target package.
Hardware Ref. 80517 POD V1.0
Adapters: PLCC84
Adapters: PLCC68
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
T_PLCC84
|
|
Product codes: IC100007 + IC81024-18
Product names: IC1000 PowerEmulator + PowerPod 80517A
|
|
Supported CPUs:
- 80C515A
- 83C515A
- 80C517A
- 83C517A
|
|
Documentation:
8051 Technical Notes V9.10.162
An adaptation board, delivered beside the POD, must be used when adapting the POD to the PLCC68 target package.
Hardware Ref. 80517A POD V1.0
Adapters: PLCC84
Adapters: PLCC68
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
T_PLCC84
|
|
Product codes: IC100007 + IC81025-30
Product names: IC1000 PowerEmulator + PowerPod 8031 DS80C320
|
|
Supported CPUs:
- 80C320
- 80C323
- 80C310
- 8031
- 80C31
- 8032
- 80C32
- 8344
- 80C51FA
- 8xC52/54/58
- 80C154
- 80C321
- 80CL410
- 80C652
- 80C654
- 80C851
- C501/502
- C504/505(C)
- AT89S8252
- AT89LS53
- AT89Cx051
- TS80C51U2 (ROMless)***
- TS80C31X2 (ROMless)***
- TS80C32X2 (ROMless)***
|
|
Documentation:
8051 Technical Notes V9.10.162
Hardware Ref. 8031/DS80C320 POD V1.5
Adapters: PLCC44
Adapters: QFP44 Yamaichi
Adapters: QFP44 TET
Adapters: DIP20 (IA40D20D1051)
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
DIP40 T_QFP44 T_PLCC44
|
|
Product codes: IC100007 + IC81026-24
Product names: IC1000 PowerEmulator + PowerPod 83C552 B
|
 |
Supported CPUs:
- 8xC552
- 8xC562
- 8xC652
- 8xC654
- 83C662
- 80C851
- 80C51BH
|
|
Documentation:
8051 Technical Notes V9.10.162
An adaptation board, delivered beside the POD, must be used when adapting the POD to the PLCC44 target package.
Adapters: PLCC68
Adapters: PLCC44 (IA40D44P8031)
Socket converter SOC049 (40DIP->44QFP)
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
T_PLCC68S
|
|
Product codes: IC100007 + IC81029-16
Product names: IC1000 PowerEmulator + PowerPod 80C592
|
| |
Supported CPUs:
|
|
Documentation:
8051 Technical Notes V9.10.162
Hardware Ref. 80C592 POD V1.1
Adapters:PLCC68
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
T_PLCC68
|
|
Product codes: IC100007 + IC81030
Product names: IC1000 PowerEmulator + PowerPod 80C51GB
|
|
Supported CPUs:
|
|
Documentation:
8051 Technical Notes V9.10.162
Hardware Ref. 80C51GB POD V1.0
Adapters: PLCC68
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
T_PLCC68
|
|
Product codes: IC100007 + IC81032
Product names: IC1000 PowerEmulator + PowerPod NXP H-80C752
|
 |
Supported CPUs:
- 8xC748
- 8xC749
- 8xC750
- 8xC751
- 8xC752
|
|
Documentation:
8051 Technical Notes V9.10.162
POD supports DIP28 by default.
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
DIP28
|
|
Product codes: IC100007 + IC20034
Product names: IC1000 PowerEmulator + PowerPod DS87C530
|
 |
Supported CPUs:
|
|
Documentation:
8051 Technical Notes V9.10.162
An adaptation board, delivered beside the POD, must be used when adapting the POD to the PLCC44 target package.
Hardware Ref. DS87C530 POD V1.2
Adapters: PLCC52
Adapters: PLCC44 (IA40D44P8031)
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
T_PLCC52
|
|
Product codes: IC100007 + IC10020
Product names: IC1000 PowerEmulator + PowerPod NXP H-8xC52**
|
 |
Supported CPUs:
- 80C31/51
- 8xC32/52
- (AT89(C)(S)5x)
- 8xC52/54/58
- 8xC550
- 8xC053/54
- 8xC654/652
- 8xC591*
- 8xC528
- 8xC524
- 8xC51(Fx)(Rx)(+)
- 8xC575
- 8xC504
- AT89C1051
- AT89C2051
- AT89C4051
|
|
Documentation:
8051 Technical Notes V9.10.162
The adaptation board, delivered beside the POD, must be used when adapting the POD to the PLCC44 target package.
Hardware Ref. H-8xC52 POD V1.9
Adapters: QFP44 Yamaichi
Adapters: QFP44 TET
Adapters: PLCC44 (from T_PLLC44)
Adapters: PLCC44 (IA40D44P8031) (from DIP40)
Adapters: DIP20 (IA40D20D1051)
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
DIP40 T_PLCC44S
|
|
Product codes: IC100007 + IC10020
Product names: IC1000 PowerEmulator + PowerPod NXP H-89C51Rx2**
|
|
Supported CPUs:
- 89C51RB2
- 89C51RC2
- 89C51RD2
- 89V51RD2
- 89C660
- 89C662
- 89C664
- 89C668
- 80C32X2BA
|
|
Documentation:
8051 Technical Notes V9.10.162
The adaptation board, delivered beside the POD, must be used when adapting the POD to the PLCC44 target package.
Hardware Ref. H-8xC52 POD V1.9
Adapters: QFP44 Yamaichi
Adapters: QFP44 TET
Adapters: PLCC44 (from T_PLLC44)
Adapters: QFP44
Adapters: PLCC44 (IA40D44P8031) (from DIP40)
Adapters: DIP20 (IA40D20D1051)
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
DIP40 T_PLCC44S
|
|
Product codes: IC100007 + IC10020
Product names: IC1000 PowerEmulator + PowerPod Atmel H-89C51Rx2**
|
|
Supported CPUs:
- TS80C51U2
- TS80C31X2
- TS80C32X2
- TS80C51RA2
- TS8xC51RB2
- TS8xC51RC2
- TS80C51RD2
- AT89C55WD
- **** Extended mode only!
|
|
Documentation:
8051 Technical Notes V9.10.162
The adaptation board, delivered beside the POD, must be used when adapting the POD to the PLCC44 target package.
Hardware Ref. H-8xC52 POD V1.9
Adapters: QFP44 Yamaichi
Adapters: QFP44 TET
Adapters: PLCC44 (from T_PLLC44)
Adapters: QFP44
Adapters: PLCC44 (IA40D44P8031) (from DIP40)
Adapters: DIP20 (IA40D20D1051)
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
DIP40 T_PLCC44S
|
|
Product codes: IC100007 + IC10020
Product names: IC1000 PowerEmulator + PowerPod 8xC51 PEM**
|
|
Supported CPUs:
Intel 8051 core and pin compatible derivates with 6 or 12 clocks per machine cycle
- extended mode - single chip mode(***)
|
|
Documentation:
8051 Technical Notes V9.10.162
The adaptation board, delivered beside the POD, must be used when adapting the POD to the PLCC44 target package.
Hardware Ref. H-8xC52 POD V1.9
Adapters: QFP44 Yamaichi
Adapters: QFP44 TET
Adapters: PLCC44 (from T_PLLC44)
Adapters: QFP44
Adapters: PLCC44 (IA40D44P8031) (from DIP40)
Adapters: DIP20 (IA40D20D1051)
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
DIP40 T_PLCC44S
|
|
Product codes: IC100007 + IC10022
Product names: IC1000 PowerEmulator + PowerPod Atmel 89C51CC
|
| |
Supported CPUs:
- T89C51CC01
- T89C51CC02
- T89C51CC03 (*8)
- T89C51AC2
- T89C5115
- T89C51AC3
- - extended mode
- - single chip mode(***)
|
|
Documentation:
8051 Technical Notes V9.10.162
The adaptation board, delivered beside the POD, must be used when adapting the POD to the PLCC44 target package.
Hardware Ref. Atmel 89C51CC POD V1.1
Adapters: PLCC44
Adapters: PLCC28 (IA44PGA28PLCC)
Adapters: QFP44
Adapters: QFP32 (from T_PLLC44)
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
T_PLCC44S
|
|
Product codes: IC100007 + IC10023
Product names: IC1000 PowerEmulator + PowerPod NXP P87LPC769
|
 |
Supported CPUs:
- P87LPC760
- P87LPC761
- P87LPC762
- P87LPC764
- P87LPC767
- P87LPC769
|
|
Documentation:
8051 Technical Notes V9.10.162
Adapters DIP14 and DIP16 are delivered beside the POD by default.
Hardw. Ref. NXP P87LPC769 POD V1.0
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
DIP20
|
|
Product codes: IC100007 + IC10025
Product names: IC1000 PowerEmulator + PowerPod T8xC5112
|
|
Supported CPUs:
- T8xC5112 (*5)
- T8xC5111 (*6)
|
|
Documentation:
8051 Technical Notes V9.10.162
POD supports DIP24 by default.
Hardware Reference T8xC5112 POD V1.0
Adapters: PLCC52
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
T_PLCC52
|
|
Product codes: IC100007 + IC10026
Product names: IC1000 PowerEmulator + PowerPod TS80C51Rx2
|
|
Supported CPUs:
- AT89C51ED2 (*5)
- AT89C51ID2 (*5)
- AT89C51RD2 (*5)
- TS8xC51RA2 (*5)
- TS8xC51RB2 (*5)
- TS8xC51RC2 (*5)
- TS8xC51RD2 (*5)
- T8xC5101 (*5)
|
|
Documentation:
8051 Technical Notes V9.10.162
POD supports DIP24 and DIP28 by default.
Hardware Ref. TS80C51Rx2 POD V1.0
Adapters: PLCC68
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
T_PLCC68
|
|
Product codes: IC100007 + IC10028
Product names: IC1000 PowerEmulator + PowerPod T8xC5121
|
| |
Supported CPUs:
|
|
Documentation:
8051 Technical Notes V9.10.162
Hardware Reference T8xC5121 POD V1.0
Adapters: PLCC52
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
T_PLCC52
|
|
Product codes: IC100007 + IC10029
Product names: IC1000 PowerEmulator + PowerPod NXP P89LPC935
|
 |
Supported CPUs:
- P89LPC901
- P89LPC902
- P89LPC903
- P89LPC906
- P89LPC907
- P89LPC908
- P89LPC912
- P89LPC913
- P89LPC914
- P89LPC920
- P89LPC921
- P89LPC922
- P89LPC930
- P89LPC931
- P89LPC932A1
- P89LPC934
- P89LPC935
- P89LPC9102 (*7)
- P89LPC9103 (*7)
- P89LPC9107 (*7)
|
|
Documentation:
8051 Technical Notes V9.10.162
Hardware Ref. NXP P89LPC936 POD V1.2
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
T_DIP28
|
|
Product codes: IC100007 + IC10029
Product names: IC1000 PowerEmulator + PowerPod NXP P89LPC936
|
|
Supported CPUs:
- P89LPC901
- P89LPC902
- P89LPC903
- P89LPC906
- P89LPC907
- P89LPC908
- P89LPC912
- P89LPC913
- P89LPC914
- P89LPC920
- P89LPC921
- P89LPC922
- P89LPC930
- P89LPC931
- P89LPC932A1
- P89LPC934
- P89LPC935
- P89LPC9102 (*7)
- P89LPC9103 (*7)
- P89LPC9107 (*7)
|
|
Documentation:
8051 Technical Notes V9.10.162
Hardware Ref. NXP P89LPC936 POD V1.2
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
T_DIP28
|
|
Product codes: IC100007 + IC10100
Product names: IC1000 PowerEmulator + PowerPod HMS9XC8032
|
 |
Supported CPUs:
|
|
Documentation:
8051 Technical Notes V9.10.162
Hardw. Ref. HMS9XC8032 POD V1.3
|
|
Required winIDEA:
2011 Build 9.11.77
POD target layout:
T_QFP80HMS
|
* POD Rev. C or higher necessary
** Different logic POD is selected in winIDEA, depending on the CPU being emulated. Refer to POD Hardware Reference for more details.
*** Single chip emulation requires minor code modification. Refer to the associated hardware reference document for more details.
**** Max. (iC1000) supported frequency = 54 MHz (27MHz when using X2 speed improvement (6-clocks/machine cycle))
*5 iSYSTEM proprietary port emulation mode (PEM) is used to emulate single-chip mode. Refer to hardware ref. document for more details.
*6 Refer to hardware reference document for restrictions.
*7 These CPUs can be supported on request (SFRs + adapter)
*8 Only the CPU in the PLLC44 package is supported
|
