Solutions for Cortex
|
On-Chip Debugging
|
 |
iC5000
New development platform iC5000 On-Chip Analyzer is based on programmable hardware where support for different microcontroller families and features is controlled via software. Major benefit is one time investment into hardware while supported debug & advanced test feature set can be extended at any time via software.
Products >>
|
 |
iC3000 & Debug iCARD
Development system based on iC3000HS or iC3000GT with CPU family specific debug interface card (iCARD) for on-chip debug interfaces such as JTAG, BDM, SDI, OnCE, SWD, N-WIRE, DAP, … featuring standard debugging and for selected devices also trace support based on on-chip trace buffer.
Products >>
|
|
On-Chip Debugging + Advanced Trace
|
 |
iC5000 & Trace License
New development platform iC5000 On-Chip Analyzer is based on programmable hardware where support for different microcontroller families and features is controlled via software. Major benefit is one time investment into hardware while supported debug & advanced test feature set can be extended at any time via software.
Products >>
|
|
iC3000 & iTRACE GT
Development system based on iC3000GT with an iTRACE GT extension box to support besides standard debugging also advanced features such as trace, profiling and code coverage over a long period of time. A CPU family specific Probe is needed.
Products >>
|
Products for Cortex
iC5000
|
Product codes: IC50000 + IC50020 + IC50111 (or IC50112)
Product names: iC5000 Base Unit + iC5000 Debug/Trace Module + 20-pin (or 14-pin) 2.54 ARM Cable Adapter
|
 |
Supported cores:
Cortex-M0
Cortex-M3
Cortex-R4
Cortex-A8
ARM720T
ARM7DI
ARM7TDMI
ARM7TDMI-S
ARM9TDMI
ARM920T
ARM922T
ARM925
ARM926EJ-S
ARM940T
ARM946E-S
ARM966E-S
XScale
Supported CPU families*:
Atmel AT91SAM
Freescale MAC7xxx
Freescale i.MXS, i.MX21, i.MX51
Intel IXPxxxx, PXAxxx
Luminary Micro LM3Sxxxx
NXP LPC11xx, LPC13xx, LPC17xx
NXP LPC2000, LPC3000
ST STM32
ST STR7, STR9
Texas Instruments TMS570
Texas Instruments OMAP35x
|
|
Documentation:
Cortex-M3 Technical Notes V9.10.124
Cortex-M0/M1 Technical Notes V9.10.86
ARM Debug Technical Notes V9.10.86
XScale Technical Notes V9.9.86
Hardware Ref. IC5000 V1.8
|
|
Required winIDEA:
2010 Build 9.10.98
|
|
Product codes: IC50000 + IC50020 + IC50111 (or IC50113)
Product names: iC5000 Base Unit + iC5000 Debug/Trace Module + 20-pin 2.54 (or 1.27) Cortex Cable Adapter
|
|
Supported cores:
Cortex-M0
Cortex-M3
Supported CPU families*:
Atmel AT91SAM
Luminary Micro LM3Sxxxx
NXP LPC1000
ST STM32
|
|
Documentation:
Cortex-M3 Technical Notes V9.10.124
Cortex-M0/M1 Technical Notes V9.10.86
Hardware Ref. IC5000 V1.8
|
|
Required winIDEA:
2010 Build 9.10.98
|
* Contact iSYSTEM representative if your particular device is not listed in the table. New devices can be added on request.
* Contact iSYSTEM representative if your particular device is not listed in the table. New devices can be added on request.
* Contact iSYSTEM representative if your particular device is not listed in the table. New devices can be added on request.
** supported only ARM7/ARM9 devices, which don't require debug JTAG TRST signal for debugging
iC5000 & Trace License
|
Product codes: IC50000 + IC50020 + IC50111 (or IC50113)
Product names: iC5000 Base Unit + iC5000 Debug/Trace Module + 20-pin 2.54 (or 1.27) Cortex Cable Adapter
|
|
Supported cores:
Cortex-M0
Cortex-M3
Supported CPU families*:
Atmel AT91SAM
Luminary Micro LM3Sxxxx
NXP LPC1000
ST STM32
|
|
Documentation:
Cortex-M3 Technical Notes V9.10.124
Cortex-M0/M1 Technical Notes V9.10.86
Hardware Ref. IC5000 V1.8
|
|
Required winIDEA:
2010 Build 9.10.98
|
* Contact iSYSTEM representative if your particular device is not listed in the table. New devices can be added on request.
* Contact iSYSTEM representative if your particular device is not listed in the table. New devices can be added on request.
|
