Communication

items
I cannot establish the Ethernet communication between my PC and the iC1000 emulator. Why?
I have been running WinIDEA 9.2 and 9.4 on a win98 machine for about 4 years. I recently upgraded to Win XP and am not able to establish the communication to the IC3000 via the serial port. When I first opened winIDEA, I was prompted to upgrade the COM/L
I have problems using the USB communication. Why?
I have problems when i connect the emulator to the PC via a LPT cable.
I upgraded from winIDEA 8.6 to winIDEA 9.0 and now no communication works, neither LPT nor RS232. What happened?
We have here two systems, one is IC1000 and the other is IC181. Both systems were working perfectly until we changed to Windows XP. We have installed an add-on Parallel port in the PC, which was working with both ICEs with windows ME. Now both ICEs are o
What IP configuration options do iSYSTEM emulators offer?
When setting up the "System Config" for the Ethernet, the TCP port is set to 5313 as a default, and its instruction reads that any value from 1024 to 65535 should be entered, what's that TCP port for? I couldn't get the Ethernet to work on both, iC1000 o
When using Ethernet communication with any iSYSTEM product on Windows NT or Windows 2000 platform, note that you must have administrator privileges, otherwise the communication may fall out after a while, e.g. 10 minutes. It's a known issue and will be r