Error Messages

items
Error 105: Cannot init Hardware. Error loading FPGA at BDMSDI module
Error 128: Incorrect PEAR register. Valid setting mask is xx10x1xx
Error 131: Incorrect Trace module type selected
Error 21: Cannot start emulation. Check RESET vector, Vcc and clock source…
Error 3: Cannot initialize emulator
Error 44: BDM module not found
Error 54: Invalid emulation memory size selected
Error 54: Invalid emulation memory size selected
Error 5: Cannot Initialize Emulator, Cannot load FPGA on POD
Error 63: Error during loading CPLD
Error 73: Cannot initialize hardware. Resource error
Error 75: Programming FPGA
Error 7: Incorrect POD selected
Error 80: Cannot set oscillator
Error 90: Memory areas 0xFF007B-0xFF007D and 0xFFFFD0-0xFFFFE3 are reserved for emulator
Error 97: Cannot start emulation! Check clock, Vcc and reset vector 1FFE0000h
Error message "Device not ready at address …”
I get an error message “Error attaching to HASYST” when I start winIDEA.
I get an error message “OLE initialization failed” when I start winIDEA.
“Syntax Error” during download