LIN cable banana jacks & pin wires
|
The IC57040-LIN-JACK cable is used to connect the CAN/LIN Accessory to an existing LIN network via banana jack connectors. The cable length is 0.65m. The cable connects to the LIN1 or LIN2 connector.
|
The IC57040-LIN-PIN cable is used to connect the CAN/LIN to an existing LIN network to the pins typically found on a 2.54mm pitch header (0.63mm square pins). The cable length is 0.65m. The cable connects to the LIN1 or LIN2.
Cable and pin color |
Signal |
---|---|
RED |
VBAT |
BLACK |
GND |
YELLOW |
LIN |