Hardware User Manuals

Cypress CYT2B9 Emulation Adapter is based on the 176-pin CYT2B98CA superset device and provides full trace capabilities for the

•64-pin

•80-pin

•100-pin

•144-pin

Traveo II CYT2B9 Adaptation, where trace port is not available or lacks the full trace capability.

Cypress CYT2B9 Emulation Adapter supports following debug and trace interfaces:

•JTAG or SWD debug interface;

•MTB trace to trace Cortex-M0+ program execution; Trace data is stored in 4KB dedicated RAM memory and read out through JTAG or SWD;

•ETM/ITM trace to trace Cortex-M4 program execution; Trace data is connected to the external trace port (CPU port P18_4 – P18_7 or P22_0 – P22_3) which then connects to 20-pin 1.27mm CoreSight Debug Adapter;

•ETB trace to trace Cortex-M4 program execution; Trace data is stored in 8KB dedicated RAM memory and read out through JTAG or SWD;

•Serial wire viewer (SWV) and printf() style debugging through a Single Wire Output (SWO) “trace” pin on Cortex-M4.

Emulation Adapter can also be used as a standalone device for microcontroller evaluation purposes or for development and test of an embedded application ahead of target board availability.