ST SPC58 2B Line Emulation Adapter V2.3
ST SPC58 (Chorus) 2B Line Emulation Adapter primary use case is providing Nexus trace functionality for the SPC58 2B Line devices in the QFP64 and the QFP100 packages, where Nexus trace port is not available.
|
The Emulation Adapter might differ in some peripherals from the target device; therefore, the device datasheet should be checked. |
The Emulation Adapter is based on the 144-pin "superset" device and provides the adaptation to 64-pin and 100-pin QFP target package.
Alternative use case is also a Standalone operation. In this case customer can start developing and testing the application while his target may not be available yet.
ST SPC58 2B Line Emulation Adapter is based on the SPC582B60E5 device in the QFP144 package, only in which the Nexus trace port is exposed and available. It’s a "superset" device with 1MB program flash and can emulate all ST SPC58 2B Line devices in smaller packages.
Complete Emulation Adapter is split into individual parts which makes it flexible when support for different target packages is required. A typical setup in conjunction with the target contains:
•IEA-SPC582B (Microcontroller part)
•Conversion board
•Solder part
|
More information about our products via sales@tasking.com. |
