ST SPC58 C Line Emulation Adapter V2.5
ST SPC58 (Chorus) C Line Emulation Adapter primary use case is providing Nexus trace functionality for the SPC58 C Line devices in the QFP packages, where Nexus trace port is not available. The emulation adapter is based on the 292-pin "superset" device and provides the adaptation to
•64-pin
•100-pin
•144-pin
•176-pin QFP package Adaptations.
|
The Emulation Adapter might differ in some peripherals from the target device; therefore, the device datasheet should be checked. |
Alternative use case is a Standalone operation, where you can start developing and testing the application while the target not be available yet.
ST SPC58 C Line Emulation Adapter is based on the SPC58EC80 device in the BGA292 package, only in which the Nexus trace port is exposed and available (P1 connector). It’s a "superset" device with 4MB program flash and can emulate all ST SPC58 C Line devices in smaller packages.
Complete Emulation Adapter is split into individual parts which makes it flexible when support for different target packages is required. A typical setup in conjunction with the target contains:
•IEA-SPC58EC (Microcontroller part)
•Conversion board
•Solder part
|
More information about our products on www.isystem.com or via sales@isystem.com. |
