BGA Assembly
1. Solder the Solder part B on the Target A.
2. (optional, recommended) Connect Extender C to the Solder part B.
The Extender protects from damaging the Solder part if the Emulation Adapter setup is frequently assembled and disassembled. Be careful and gentle during this procedure because all parts of the setup are extremely sensitive, and pins can easily bend or even break in the worst-case scenario.
More Extenders can be stacked to gain height between the Emulation Adapter and the Target, if surrounding components so high that they prevent connecting the Emulation Adapter. Keep the number of Extenders C at minimum since every Extender degrades the signal integrity of the electrical signals.
3. Assemble in order: Emulation Adapter F, optional Measurement board E, Conversion board D.
4. Connect Conversion board D to:
• Solder part or
• Extender
