winIDEA HelpAIN
This chapter describes how configure and provide network description for the Network analyzer ADIO - AIN.
Select:
•Whether to show the selected port in the HIL Plugin / Analyzer analysis
•Name for the analog input port
•Multiplication factor for the input signals, in case the signal is externally divided
•The number of samples used to calculate an average measurement, which provides a more stable measurement
 |
Power measurement
The analog inputs can also be used for power measurement in combination with the Power Probe. If you are using the Power Probe, choose to use AIN0 / AIN1 for power measurement.
Select the shunt resistor to match the one you have set on the power probe.
