mDIO Cable
|
mDIO Cable is used to connect the Active Probe mDIO port with the signals around the debugged microcontroller, which can then be either read or controlled by the debugger. For example, the debugger can periodically service an external watchdog through the mDIO output or just read and record an external signal through the mDIO input. It must be ordered separately. Length of the cable is 20 cm.
The following pinout is valid on the Active Probe side:
Number |
Name |
Color |
|---|---|---|
Pin1 |
IOØ |
White |
Pin2 |
IO1 |
Brown |
Pin3 |
GND |
Black |
mDIO Cable pinout
