Specifications
GENERAL |
|
|---|---|
Operating temperature |
10°C to 40°C |
Storage temperature |
-10°C to 60°C |
Humidity |
5% to 80% RH |
MECHANICAL |
|
Size |
113 x 113 x 45 mm |
Weight |
approx. 250g |
COMMUNICATION |
|
Communication interfaces to PC |
USB 3.0, 10/100/1000, Ethernet |
ELECTRICAL |
|
Supply voltage |
USB PD, 9V/3A |
Power consumption |
Max. 5 W (dependent on operation mode) |
mDIO |
|
Sampling rate |
125MSPS |
mDIO PWR voltage |
5V |
mDIO PWR current |
Max. 100 mA |
mDIO I/O |
• 4 channels configurable Input or Output operation • 47Ohm serial termination + 10kOhm pull-down • Supported operating voltage: 1.8V – 5.5V • Voltage threshold: CMOS for operating voltage below 2V and LVTTL for operating voltage 2V or higher Refer to Texas Instruments SN74LVC1T45 datasheet for more details on the VIL, VIH characteristics. |
Input edge detection |
Edge detection: Short non-periodic changes at min. 16ns width |
Periodic input signal bandwidth |
Up to 1MHz |
Periodic output signal bandwidth |
Up to 500kHz |
DEBUG |
|
Debug signal valid input voltage range |
1.8 - 5.0 V (max. 5.5 V) |
Debug signal valid output voltage range |
1.8 - 3.3 V (max. 3.6 V) |
Debug signals termination |
47 Ohm series termination/protection resistors |
Debug signals pull-down / pull- up without clock and RESET |
Configurable 10k Ohm pull-down / pull-up |
RESET pull-down / pull- up |
1k Ohm pull-up |
