Infineon TC265DE Emulation Adapter V1.5
Infineon TC265DE Emulation Adapter primary use case is providing AURORA GigaBit Trace (AGBT) functionality for the TC265 device in the QFP144 package featuring no trace functionality. The Emulation Adapter is based on the 216-pin emulation device.
Alternative use case is a Standalone operation. In this case customer can start developing and testing the application while his target may not be available yet.
Complete emulation adapter is split into individual parts which makes it flexible when support for different target packages is required. A typical setup in conjunction with the target contains:
•IEA-TC265DE (Microcontroller part)
The emulation adapter can be used in conjunction with iSYSTEM iC6000 debug and test tool or other third-party tools supporting AGBT interface for Infineon Aurix family. The tool connects to 22-pin Samtec ERF8 connector (P1) providing the DAP debug and the AGBT interface connection.
Trace provides non-intrusive and deep insight in the embedded application without influencing real-time behavior. It can be used to debug the most difficult and complex code defects and offers a complete trace history capture of the program execution.
iSYSTEM BlueBox combined with Debug Adapters provides high-speed connection to the target device using a variety of debug/trace interfaces. Furthermore, IOM6 accessories enable the synchronous capture of analog and digital signals in parallel to trace information. Hardware tools coupled with winIDEA IDE enable reliable recording of program flow and data trace. Integrated measurement and visualization tool Analyzer provides graphical presentation of execution time analysis and much more.