Mechanical information
 Side view of the Solder part |
 Solder part solder upper view |
 Solder part solder bottom view
|
|
 Top view of the Conversion board
|
 NQPACK Solder pad view |
 Top view of the Emulation Adapter |
Solder part
Recommended foot pattern shown is for the NQPACK soldering. Refer also to the IC package foot pattern recommended by the microcontroller manufacturer when the microcontroller is meant to be soldered on the same foot pattern.
Ordering code |
Unit (mm) |
|
|
||||||
|---|---|---|---|---|---|---|---|---|---|
A |
B |
C |
D |
E |
Q |
S |
n1 |
Pitch |
|
IANQPACK100SE |
21 |
14.65 |
14.1 |
0.5 |
0.18 |
13.20 |
0.18 |
24 |
0.4 |
|
You must be familiar with the SMT (Surface Mount Technology) soldering to solder the NQPACK to the PCB. On request, iSYSTEM provides this service too. |
Emulation Adapter
Ordering code |
Unit (mm) |
||||||
|---|---|---|---|---|---|---|---|
M |
N |
P |
R |
S |
T |
V |
|
IEA-TC234LF-ST |
52 |
52 |
|
|
32.6 |
38 |
47.5 |
IEA-TC234LFBTQ100W |
|
|
52 |
52 |
|
|
|
