9.21.31.0.123864 (09.09.2021)
Hotfix build release notes
Newly supported devices
Marvell
88Q5020, 88Q5040, 88Q5054 - Added support for:
•Debug: JTAG, M7
•UMI: QSPI
ARM Cortex
Generic ARM CM0 - Added support for:
•Debug
•Trace
Devices Cortex-Mx/Ax/Rx were removed.
China-Core
CCFC2002BC - Added support for:
•Debug: JTAG
•Debug
•SFR
•FPM
Texas Instruments
TMS570LS0432 - Added support for:
•Debug: JTAG, R4
•SFRs
•UMI: Internal Flash
RH850
P1M-E - Added support for the following devices:
•R7F701378
•R7F701380
•R7F701382
Supported features:
Debug: LPD
•SFR
•UMI: Data, Code
•Trace: Soft Trace On-Chip, Program On-Chip, Data On-Chip, Soft Trace LPD
RH850
R7F702301 - Added support.
NXP
i.MX 8M Nano - Added support for the following devices:
•i.MX 8M Nano Quad - MIMX8MN6xVT
•i.MX 8M Nano QuadLite - MIMX8MN5xVT
•i.MX 8M Nano UltraLite Quad - MIMX8MN5xVP
•i.MX 8M Nano Dual - MIMX8MN4xVT
•i.MX 8M Nano DualLite - MIMX8MN3xVT
•i.MX 8M Nano UltraLite Dual - MIMX8MN3xVP
•i.MX 8M Nano Solo - MIMX8MN2xVT
•i.MX 8M Nano SoloLite - MIMX8MN1xVT
•i.MX 8M Nano UltraLite Solo - MIMX8MN1xVP
Supported features:
•Debug: JTAG, A53, M7, multicore
IDE
SFRs Database location
SFRs Database location moved to Tools menu / Options / SFRs from Debug menu / Debug Options / SFRs.
Currently Tools menu / Options / SFRs |
Previously Debug menu / Debug Options / SFRs |
JTAG Chain detection
Removed from Hardware menu / Tools.
Safe mode
Safe mode option, which minimizes the possibility that a specific sector would be incorrectly programmed in case of sudden communication or power loss, added to Hardware / <Device> / Configure
Safe mode types are:
•Auto
•Disable
•Enable
Core selection for Flash programming
Added a possibility to select a core for Flash programming selection to Hardware / <Device> / Configure.