Please enable JavaScript to view this site.

Arm 20-pin 2.54 mm Galvanic Isolation Adapter

Galvanic isolation is used where two electric circuits must communicate, but their grounds may be at different potentials. It is an effective method of breaking ground loops between the two circuits. Galvanic isolation is also used for safety, preventing accidental current from reaching ground through a person's body.

 

Galvanic Isolation Adapters provide a basic isolation that withstands high voltages.

 

To prevent injury to personnel when dealing with potentially hazardous voltages it is mandatory to have a second protection measure in place, in case the first insulation barrier fails. This is termed double or, reinforced isolation. How should a double isolation be implemented depends on the use-case or application setup.

 

Warning_orange

It is your responsibility to check the local safety directives applicable to your company and country to ensure that all requirements are met.

 

Arm 20-pin 2.54 mm Galvanic Isolation Adapter is used to electrically isolate:

iC7max (or iC5700) BlueBox in conjunction with:

o20-pin 2.54 mm ARM Debug Adapter (Ordering code IC50111-1) or

oArm HSSTP II Active Probe (Ordering code IC71125-1 or IC57125-1) + 40-pin Samtec ERF8 to 20-pin 2.54 mm ARM Converter (Ordering code IASAM40ARMPIN20)

from the embedded target.

 

i-icon

More information about our products via sales@tasking.com.

Copyright © 2024 TASKING Germany GmbH