Please enable JavaScript to view this site.

Navigation: » No topics above this level «

Scroll Prev Top Next More

DAP over CAN V1.5

DAP over CAN Physical Layer Converter enables debugging via the regular CAN pins of the ECU connector without opening its housing. This connection is electrically robust due to the nature of the CAN bus. The DXCPL Converter translates Infineon Aurix™ SPD (Single Pin DAP) encoded DAP messages to the CAN bus physical layer.  Hardware solution supports DXCPL on Infineon Aurix™ TC2xx and TC3xx devices.

 

i-icon

For details about DXCPL operation, refer to Infineon Application Note AP32264.

 

 

DAP over CAN Physical Layer Converter can be used with iC5700 BlueBox:

via DTM or

and iC7max via Infineon DAP/DAPE Active Probe or

and iC7max via Infineon DAP/DAPE II Active Probe or

and iC7max via Infineon AGBT Active Probe and a 10-pin 1.27 mm DAP Converter

 

Warning_orange

Schematic designer must assure the correct state of TRST signal on cold PORST.

Copyright © 2024 TASKING Germany GmbH