Please enable JavaScript to view this site.

Infineon DAP/DAPE II Active Probe V1.1

Infineon DAP/DAPE II Active Probe enables debugging, tracing and testing of Infineon’s Aurix™ microcontroller family. It supports DAP and DAPE debug interface operating at their maximum frequency.  Its small and compact hardware size allows for connecting to a target microcontroller in a confined space as far as 10 m away.

 

Infineon DAP/DAPE II Active Probe is connected to the iC7max and iC5700 BlueBox on one side via FNet cable. To connect the Active Probe to an embedded target with architecture-specific target connector, an Active Probe Adapter must be ordered separately. If your target connector's pinout doesn't align with the Active Probe Adapter's pinout, you have the option to order Converters.

 

 

The Infineon DAP/DAPE II Active Probe kit is delivered with the following components:

 

Infineon DAP/DAPE II

Active Probe

Two 10-pin 1.27mm 10cm long ribbon cables

1m FNet

Cable

Ordering code:

IC57163-1

Ordering code:

IA10PIN10PIN127-AP

Ordering code:

BB-FNET-100

Click to enlarge

ia10pin10pin127-ap__

bb-fnetmicro-100__

Copyright © 2024 TASKING Germany GmbH