winIDEA Release Note 9.26.11
In this topic:
Verified build release date: 18 Sep 2026
winIDEA build number: 9.26.11.1.315622
This release adds full debug, flash, and trace support for 10 new SoCs across five vendors, including a near-complete Texas Instruments C2000 lineup and first-time support for Yuntu Microelectronics. It also extends trace, security, and peripheral debug capabilities on 8 existing devices from FlagChip, GigaDevice, Renesas, STMicroelectronics, and Texas Instruments.
•Debug multiple SoCs as one synchronized system - One iC7max BlueBox probe controls and observes up to six SoCs in a single winIDEA, sharing a common BlueBox timestamp counter for synchronized run/stop and a unified trace timeline.
•Manage a full SoC from one winIDEA session - Observe the whole SoC without juggling multiple winIDEA instances.
•Give an AI agent structured access to your running system - winIDEA AI kit, included with the new winIDEA Expert and AI add-on license tiers, lets an AI agent investigate behavior, guide workflows, generate automation scripts, and verify results using live system data.
•Broader SoC support - Debug and flash support added for 10 new SoCs across Texas Instruments, STMicroelectronics, GigaDevice, and Yuntu Microelectronics, plus trace, security, and peripheral debug extensions on 8 existing devices — see Newly supported SoCs for the full list.
Debug multiple SoCs as one synchronized system
Debug and trace multiple SoCs on a single, synchronized timeline. One iC7max BlueBox controls and observes up to 6 SoCs in a single winIDEA, sharing a common BlueBox timestamp counter across all connected SoCs.
Capabilities:
•Synchronized run/stop - when one SoC hits a breakpoint, every connected SoC halts at the same time, avoiding cross-triggered watchdogs
•Unified trace timeline - each SoC's trace stream is timestamped from the shared counter
•Automated BTF merge - per-SoC BTF files are merged and sorted by timestamp, with SoC core prefixes added automatically, for direct analysis in TA Inspection
•Dual-channel safety debug - synchronized fault injection and simultaneous observation of both channels and their voter logic, for ISO 26262 / IEC 61508 redundant architectures
•Mixed-architecture support - TriCore, Cortex-A/R/M, RISC-V, PowerPC, RH850, combinable freely across SoCs non-intrusive profiling — MegaSampling and SWAT software trace provide execution profiling across all SoCs without stopping the system or affecting timing
Trace interfaces: AGBT, DAP+, HSSTP, SWO, Parallel Trace, CAN/LIN/SPI.
Manage a full SoC from one winIDEA session
Observe the whole SoC in one winIDEA, no more multiple winIDEA instances.
Debug and trace with AI assistance
winIDEA AI kit gives an AI agent structured access to winIDEA, allowing it to work with data from the running system instead of relying on source code alone.
It can investigate behavior, guide workflows, generate automation scripts, and help verify results.
For more information, refer to Get Started with winIDEA AI Kit for agent-assisted debugging.
More ways to install winIDEA on Linux: Flatpak
winIDEA can now also be installed on Linux via Flatpak, alongside the existing Snap package.
For more information, refer to Set up winIDEA from a Flatpak on Linux.
Debug Infineon ModusToolbox projects without leaving your IDE
winIDEA integrates with Infineon ModusToolbox: a project created in ModusToolbox can be opened, built, and debugged directly in winIDEA, or through the ModusToolbox plugins for VS Code and Eclipse.
For more information, refer to Debug Infineon ModusToolbox projects with winIDEA from VS Code or Eclipse.
New licenses
License support for the new winIDEA Expert and winIDEA AI add-on tiers is included.
FlagChip FC7300
Support is extended to a new FC7300 variant.
Variants:
•FC7300F4MDSxxxxxT1C
GigaDevice GD32A71x
Debug now supports password protection and challenge-response authentication.
Features:
•Password protection
•Challenge response
GigaDevice GD32A72x
Debug now supports Cortex-M23 as an HSM core, with password protection and challenge-response authentication.
Features:
•Cortex-M23 (as HSM)
•Password protection
•Challenge response
GigaDevice GD32A74x
Debug now supports Cortex-M23 as an HSM core, with password protection and challenge-response authentication.
Features:
•Cortex-M23 (as HSM)
•Password protection
•Challenge response
Renesas RZ/T2M
Trace support is extended with ETM Parallel and ETM ETF configurations.
Features:
•Trace: ETM Parallel, ETM ETF
STMicroelectronics SR6G3
Trace support is extended with eight Cortex-R52 and Cortex-M4 configurations over ETM, ITM, and DWT ITM.
Features:
•Cortex-R52 ETM ETR
•Cortex-R52 ETM ETF
•Cortex-M4 ETM ETR
•Cortex-M4 ETM ETF
•Cortex-M4 ITM ETR
•Cortex-M4 ITM ETF
•Cortex-M4 DWT ITM ETR
•Cortex-M4 DWT ITM ETF
STMicroelectronics STM32C59x/5A3
Full debug, flash, and trace support is now available for the STM32C59x/5A3 family, including six Cortex-M33 trace configurations over Parallel and SWO.
Features:
•Debug:
oJTAG
o SWD
oCortex-M33
oPeripheral Freeze
•SFR
•Flash: Internal
•Trace
oCortex-M33 ETM Parallel
oCortex-M33 ITM Parallel
oCortex-M33 DWT ITM Parallel
oCortex-M33 ETM SWO
oCortex-M33 ITM SWO
oCortex-M33 DWT ITM SWO
Variants:
•STM32C5A3xC
•STM32C5A3xE
•STM32C5A3xG
STMicroelectronics STM32N6x7/6x5
Trace support is extended with ETM, ITM, DWT ITM, and STM configurations over Parallel and SWO, plus Peripheral Freeze debug support.
Features:
•Debug: Peripheral Freeze
•Trace:
oDWT ITM SWO
oETM Parallel
oITM Parallel
oDWT ITM Parallel
oETM ETF
oITM ETF
oDWT ITM ETF
oSTM SWO
oSTM Parallel
Texas Instruments TDA4VL, TDA4VE, TDA4AL
Flash programming now supports external eMMC on the Cortex-R5 MCU domain.
Features:
•Flash: Cortex-R5 (MCU Domain) external eMMC
Texas Instruments TMS320F2837x
Debug and flash support is now available for the TMS320F2837x family over JTAG.
Features:
•Debug
oJTAG
oC28x
•SFR
•Flash
Variants:
•TMS320F28075
•TMS320F28076
Texas Instruments TMS320F2837xD
Debug and flash support is now available for the TMS320F2837xD dual-core family over JTAG.
Features:
•Debug:
oJTAG
o2x C28x
•SFR
•Flash: FLASH
Variants:
•TMS320F28379D
•TMS320F28378D
•TMS320F28377D
•TMS320F28376D
•TMS320F28375D
•TMS320F28374D
Texas Instruments TMS320F2837xS
Debug and flash support is now available for the TMS320F2837xS single-core family over JTAG.
Features:
•Debug:
oJTAG
oC28x
•SFR
•Flash: FLASH
Variants:
•TMS320F28379S
•TMS320F28378S
•TMS320F28377S
•TMS320F28376S
•TMS320F28375S
•TMS320F28374S
Texas Instruments TMS320F28002x
Debug and flash support is now available for the TMS320F28002x family over JTAG and cJTAG.
Features:
•Debug:
ocJTAG
oJTAG
oC28x
•SFR
•Flash: FLASH
Variants:
•TMS320F280021
•TMS320F280023
•TMS320F280023C
•TMS320F280025
•TMS320F280025C
Texas Instruments TMS320F280015x
Debug and flash support is now available for the TMS320F280015x family, including dual-core (2x C28x, lockstep only) debug over JTAG and cJTAG.
Features:
•Debug
ocJTAG
oJTAG
o2x C28x (LS only)
•SFR
•Flash: FLASH
Variants:
•TMS320F2800152
•TMS320F2800153
•TMS320F2800154
•TMS320F2800155
•TMS320F2800156
•TMS320F2800157
Texas Instruments TMS320F28004x
Debug and flash support is now available for the TMS320F28004x family over JTAG and cJTAG.
Features:
•Debug:
ocJTAG
oJTAG
oC28x
•SFR
•Flash: FLASH
Variants:
•TMS320F280040
•TMS320F280040C
•TMS320F280041
•TMS320F280041C
•TMS320F280045
•TMS320F280048
•TMS320F280048C
•TMS320F280049
•TMS320F280049C
Texas Instruments TMS320F28P55x
Debug and flash support is now available for the TMS320F28P55x family over JTAG and cJTAG.
Features:
•Debug
ocJTAG
oJTAG
oC28x
•SFR
•Flash: FLASH
Variants:
•TMS320F28P559SJ2
•TMS320F28P559SJ6
•TMS320F28P559SJ7
•TMS320F28P559SJ8
•TMS320F28P559SJ9
•TMS320F28P550SJ2
•TMS320F28P550SJ6
•TMS320F28P550SJ7
•TMS320F28P550SJ8
•TMS320F28P550SJ9
•TMS320F28P559SG2
•TMS320F28P559SG6
•TMS320F28P559SG7
•TMS320F28P559SG8
•TMS320F28P559SG9
•TMS320F28P550SG2
•TMS320F28P550SG6
•TMS320F28P550SG7
•TMS320F28P550SG8
•TMS320F28P550SG9
Texas Instruments TMS320F28P65x
Debug and flash support is now available for the TMS320F28P65x family, including dual-core and single-core C28x debug configurations over JTAG.
Features:
•Debug
oJTAG
o 2x C28x (TMS320F28PxxxDx6, TMS320F28PxxxDx7)
o1x C28x + 1x C28x (LS only) (TMS320F28PxxxDx8, TMS320F28PxxxDx9)
o1x C28x (TMS320F28PxxxSxx)
•SFR
•Flash: Internal
Variants:
•TMS320F28P650DK6
•TMS320F28P650DK7
•TMS320F28P650DK8
•TMS320F28P650DK9
•TMS320F28P650DH6
•TMS320F28P650DH7
•TMS320F28P650DH8
•TMS320F28P650DH9
•TMS320F28P659DK6
•TMS320F28P659DK7
•TMS320F28P659DK8
•TMS320F28P659DK9
•TMS320F28P659DH6
•TMS320F28P659DH7
•TMS320F28P659DH8
•TMS320F28P659DH9
Yuntu Microelectronics YTM32B1MCx
Debug and flash support is now available for the YTM32B1MCx family over JTAG and SWD.
Features:
•Debug:
oJTAG
oSWD
oCortex-M33
oPeripheral Freeze
•SFR
•Flash: I
oInternal PFLASH
oInternal DFLASH
Variants:
•YTM32B1MC03
