winIDEA HelpLIN
This chapter describes how to generate triggers when certain LIN message is observed with the CAN/LIN module.
LIN1 / LIN2
LIN Network analyzer can be used to create an FNet trigger when certain LIN message is observed.
 |
Qualifier - To enable LIN module recording set qualifier:
•Enable from the start
•Enable on specified event
•Disable on specified event
Trigger
•Trigger line - Select the line you wish to trigger
oNone - Trigger is disabled
oPredefined trigger (Trace trig, RunSync, StopSync)
oCustom trigger (TC4....TC10)
•Define message ID and Mask
•Record none, all or only selected messages
