How to program Internal Flash
In this topic:
Requirements
•Selected Device in Debug | Configure Session,
•Added files you want to download to Program files,
•winIDEA workspace properly configured (that you can successfully establish a Debug Session before initiating the flash programming process).
All internal storage devices will be listed in Hardware drop-down menu.
Configuration steps
1. Open Hardware | <device> | Configure.
Note that sensitive devices, e.g. UCBs are by default disabled for security reasons, and you have enable it via Hardware | Options | Programming.
2. Configure available options.
3. Download and Eestablish Debug Session.
4. Execute operation via Hardware | <device>.
