Specifications
GENERAL |
|
|---|---|
Operating temperature |
10°C to 40°C |
Storage temperature |
-10°C to 60°C |
Humidity |
5% to 80% RH |
MECHANICAL |
|
Size |
122 x 127 x 45 mm (W x D x H) |
Weight |
approx. 500g |
OPERATION |
|
Communication interfaces to PC |
USB 2.0, 10/100 Mbps Ethernet |
Supply voltage |
10V to 24V DC |
Power consumption |
< 8W |
ELECTRICAL |
|
Debug signal valid input voltage range |
1.8V to 5.5V DC |
Debug signals |
47Ω series termination/protection resistors, ESD protection devices. Depending on the specific debug adapter, termination might be different from 47Ω on some critical signals. |
All inputs except the TDO |
10 kOhm pull-up resistor |
TDO input |
10 kOhm pull-down resistor |
TMS and TDI debug signals |
10 kOhm pull-up resistor |
RESET |
1 kOhm pull-up resistor, buffer-driven to prevent current flow into an unpowered iC5000 from a powered target board |
TAR_VREF (target reference voltage) pin |
100 kOhm input impedance |
