Please enable JavaScript to view this site.

iSYSTEM Hardware User Manuals

MPC5xxx/SPC5 14-pin 2.54mm V1.0


Galvanic isolation is used where two electric circuits must communicate, but their grounds may be at different potentials. It is an effective method of breaking ground loops between the two circuits. Galvanic isolation is also used for safety, preventing accidental current from reaching ground through a person's body.


iSYSTEM Galvanic Isolation Adapters provide a basic isolation that withstands high voltages.


To prevent injury to personnel when dealing with potentially hazardous voltages it is mandatory to have a second protection measure in place, in case the first insulation barrier fails. This is termed double or, reinforced isolation. How should a double isolation be implemented depends on the use-case or application setup.



It is a user's responsibility to check local safety related directives valid for his company and country to make sure all requirements are met.



MPC5xxx / SPC5 14-pin 2.54mm Galvanic Isolation Adapter is used to electrically isolate:

iSYSTEM iC5700 BlueBox in conjunction with

o14-pin 2.54 mm MPC5xxx Debug Adapter (Ordering code IC50150) or

oMPC5x/SPC5x Aurora Active Probe MPC5x/SPC5x Aurora Active Probe (Ordering code IC57150) + 14-pin 2.54mm JTAG Converter (Ordering code IASAM34MPCPIN14)

from the embedded target.




Find more information on or contact To reach for technical support please visit

Copyright© iSYSTEM AG Carl-Zeiss-Str.1 85247 Schwabhausen Germany