Hardware User Manuals

Zoom Window Out
Larger Text | Smaller Text
Hide Page Header
Show Expanding Text
Print Topic
Share This Topic
Save Permalink URL

Navigation: Active Probes > Infineon SGBT (HSTCU)

Device description

usbc-top

usbc-back

A – USB-C connector, with the following pinout:

Signal Direction	Signal Description	Signal	Pin	Pin	Signal	Signal Description	Signal Direction
	Ground	GND	A1	B12	NC	Not Connected
I	AGBT TX0_P	TX0+	A2	B11	CLK+	AGBT Clock	O
I	AGBT TX0_N	TX0-	A3	B10	CLK-	AGBT Clock	O
	Not Connected	NC	A4	B9	NC	Not Connected
I/O	Target Reset Pin	nRESET	A5	B8	DAP1	DAP Data	I
I/O	Optional 2nd DAP data	DAP2	A6	B7	nTRST	Output	O
I/O	Optional 3rd DAP data	DAP3	A7	B6	NC	Not Connected
O	DAP Clock	DAP0	A8	B5	Vref	Reference Voltage	I
	Not Connected	NC	A9	B4	NC	Not Connected
	Not Connected	NC	A10	B3	NC	Not Connected
	Not Connected	NC	A11	B2	NC	Not Connected
	Ground	GND	A12	B1	GND	Ground

(HSTCU) USB-C pinout

Blue colored signals are trace signals.

Signal direction definition:

O – Output from the Active Probe to the target microcontroller

I – Input to the Active Probe from the target microcontroller

B – mDIO port marked as TRIG on the housing

mDIO port provides two digital signals, which can interact with the embedded target. Each can be configured either for input or output operation.

Number	Name
Pin1	IOØ
Pin2	IO1
Pin3	GND

mDIO port pinout

mDIO port on the Active Probe

C – The indicator light provides the status of the Active Probe as follows:

	Permanently green – Powered on and ready to use.
	Blinking green – Establishing connection with the BlueBox.
	Blinking blue – Reprogramming SPLASH.
	Permanently magenta – Golden image loaded and ready to use.

D – FNet connector, that connects the Active Probe to the iC7max or iC5700. The FNet cable is delivered with the Active Probe.

Warning_orange

When powering on the system, switch the BlueBox on before powering on the target. When powering down the system, power off the target before powering off the BlueBox!

Use only original accessories for powering and connecting with the BlueBox. Consult with technical support before attempting to use any other accessory.

Please enable JavaScript to view this site.

Hardware User Manuals