FNet Profiling Dialog Reference
Network profiling is available on the iC7max BlueBox system used in combination with CAN/LIN Add-on module. AUX profiling is available on BlueBoxes equipped with an IO module (IOM2, IOM5).
|
Hardware configuration (Hardware > Options > FNet) and Network configuration (Debug > FNet Operation) need to be performed before you can configure the analyzer to record network messages. Networks will become available for selection once the configuration is complete and applied by performing programoperation. |
Navigate to the App/CPU0 page, enable FNet and press Configure to open the FNet Operation dialog and add FNet Areas.
Refer to the FNet Triggers chapter to learn more about triggers and filtering.
