Hardware Setup and Configuration
For a detailed visual presentation of the hardware setup and configuration, refer to the Getting started Tutorials. |
1. Make sure that the iC7max/iC5700 is powered OFF. See the iC7max or iC5700 Hardware User Manual for detailed instructions how to connect the BlueBox to the Target.
2. Connect the ADIO FNet port with the iC7max/iC5700 FNet port using the supplied certified FNet cable.
3. Configure FNet in winIDEA.
For further information about ADIO digital input/output, analog input/output configuration, SPI protocol description format, Power Probe use cases and configuration, go to winIDEA Help - FNet / Network description chapter.