Cypress CYT2BL
This topic describes detailed SoC settings for the following hardware:
•Emulation Adapter : Cypress CYT2BL
•Supported SoCs: CYT2BL
•User Manual: Cypress CYT2BL Emulation Adapter
General Configuration
1. Create a New Workspace via File > Workspace > New Workspace and follow the wizard.
2. Select your Target Board.
Once your workspace is created, you can recall this dialog by clicking Hardware > Select target.
Example dialog
Additional Configuration
Extra configuration is required to be able to debug.
1. Select a configuration preset based on the hardware and BlueBox configuration.
Example dialog
2. Configure the SWO clock
Make sure to match the SWO clock settings to the CPU clock settings used in the application. Refer to:
•SoC settings in Hardware > CPU Options > SoC
|
If your Target Board is not supported in winIDEA, contact Technical support. |
